Rail Handling
Worlifts, we support so you can achieve.
Home > Site Handling Equipment > Rail Handling
Worlifts can supply a wide variety of products for the lifting, transporting and inspection of rail, points and crossing components.
We can also provide bespoke lifting beams fitted with clamps, strops or chains to suit individual requirements.
Camlok CR1000 Rail Lifting Clamp
This proven design of clamp is designed to lift a wide range of rail profiles securely and safely.
Stock Code | WRC/101 |
Capacity | 1000kg |
Weight | 13kg |
Universal Rail Lifting Clamp
A simple but robust lifting clamp fitted with a manual positive locking action.
Stock Code | WRC/104 |
Capacity | 1500kg |
Weight | 7kg |
Yale D85 Pullift
The only lever hoist recommended for use with Permaquip Ironman.
The only lever hoist recommended for use with Permaquip Ironman, used with Camlok CR1000 or Universal Rail Clamps for lifting and transporting lengths of rail. The Bottom hook of the hoist is removed to be attached to the Universal Clamp and fitted with an adaptor to be attached to CR1000.
Stock Code | WLH/101 |
Capacity | 1500kg |
Weight | 16.3kg |
Rail Pulling Shoe
Used to pull lengths of rail up to 180m (600 ft) over the ballast bed.
The Shoe clamps on to the foot of the rail preventing damage to the web and running surface. Suitable for 113A and UI60 rails.
Stock Code: | |
Capacity | 180m |
Weight | 37.5kg |
Rail Handling Beams
Rail handling beams are available in various configurations to allow the lifting of single and multiple lengths of rail.
To allow use under OHL, these beams are manufactured with a central lifting eye but can be supplied with smaller eyes at each end to allow a double leg chain sling to be fitted. These beams are usually fitted with Camlok CR1000 rail clamps and are attached to the beam with a short chain assembly.
Single Rail Lifting Beams
Stock Code: | WRC/201 |
Length: | 3.5m Lifting Beam |
Capacity: | Lifts up to 9.1m (30ft) of rail section. Can be supplied with or without rail lifting clamps. |
Length: | 7.5m Lifting Beam |
Stock Code: | WRC/202 |
Capacity: | Lifts up to 18.3m (60ft) of rail section. Can be supplied with or without rail lifting clamps. |
Pal-Turn
Designed to turn heavy and bulky loads safely and with little effort.
The illustration shows two Pal-Turns being used to examine both top and underside of a rail crossing during a refurbishment process.
The Range Includes:
Stock Code: | |
Capacity: | 1 to 20t |
Length: | Customised length |
Cordless model |