Rail Handling

Worlifts can supply a wide variety of products for the lifting, transporting and inspection of rail, points and crossing components.

We can also provide bespoke lifting beams fitted with clamps, strops or chains to suit individual requirements.


Camlok CR1000
Rail Lifting Clamp

This proven design of clamp is designed to lift a wide range of rail profiles securely and safely.

Universal Rail
Lifting Clamp

A simple but robust lifting clamp fitted with a manual positive locking action.

Yale D85
Pullift

The only lever hoist recommended for use with Permaquip Ironman.

Camlok CR1000 Rail Lifting Clamp

This proven design of clamp is designed to lift a wide range of rail profiles securely and safely. Can be fitted to Lifting Beams, Ironmen, Scooters and Road Rail Vehicles using a variety of adaptors, shackles or chain components.

Stock Code WRC/101
Capacity 1000kg
Weight 13kg

Parts Drawing

Universal Rail Lifting Clamp

A simple but robust lifting clamp fitted with a manual positive locking action. Fits most common rail profiles and used extensively on LUL Network.

Stock Code WRC/104
Capacity 1500kg
Weight 7kg

Yale D85 Pullift

The only lever hoist recommended for use with Permaquip Ironman, used with Camlok CR1000 or Universal Rail Clamps for lifting and transporting lengths of rail. The Bottom hook of the hoist is removed to be attached to the Universal Clamp and fitted with an adaptor to be attached to CR1000.

Stock Code WLH/101
Capacity 1500kg
Weight 16.3kg

Parts Drawing


Rail Pulling Shoe

Used to pull lengths of rail up to  180m (600 ft) over the ballast bed.

Rail Handling Beams

Rail handling beams are available in various configurations to allow the lifting of single and multiple lengths of rail.

Pal-Turn

Designed to turn heavy and bulky loads safely and with little effort.

Rail Pulling Shoe

The Shoe clamps on to the foot of the rail preventing damage to the web and running surface. Suitable for 113A and UI60 rails.

Stock Code:  
Capacity 180m
Weight 37.5kg

Rail Handling Beams

To allow use under OHL, these beams are manufactured with a central lifting eye but can be supplied with smaller eyes at each end to allow a double leg chain sling to be fitted. These beams are usually fitted with Camlok CR1000 rail clamps and are attached to the beam with a short chain assembly.

Single Rail Lifting Beams

Stock Code: WRC/201
Length: 3.5m Lifting Beam
Capacity: Lifts up to 9.1m (30ft) of rail section.  Can be supplied with or without rail lifting clamps.
Length: 7.5m Lifting Beam
Stock Code: WRC/202
Capacity: Lifts up to 18.3m (60ft) of rail section.  Can be supplied with or without rail lifting clamps.

Pal-Turn

The illustration shows two Pal-Turns being used to examine both top and underside of a rail crossing during a refurbishment process.

The Range Includes:

Stock Code:  
Capacity: 1 to 20t
Length: Customised length
  Cordless model

By continuing to use the site you agree to our privacy & cookies policy