Machine lifts, operating instruction

OPERATION:

Before lifting a load. The cylinder must be securely attached to the toe lift base. Keep the contact surface between the toe lift and the load clean. The contact surface must be free of oil, grease, or dirt to avoid slippage. Before lifting a load make sure that that the contact surface of the toe lift completely supports the load. See Fig. 1. The lock pins must always be properly positioned in the support feet while lifting.

Advancing and retracting the machine lift. For complete operating instructions refer to HAND PUMPS and BASIC HYDRAULIC SYSTEMS in this manual.

IMPORTANT:

Always keep the guide paths of the lifting plate greased.