Nobody likes it when there are line repairs taking place, but unfortunately, it has to happen in order to keep the trains running during busy times. In order to keep downtime to a minimum, though, rail companies tend to schedule them during holidays or a quiet periods. Certainly, the aim is to avoid rush hour…

Norbar have always been at the forefront of technology when it comes to torque tools, and their new release – the EvoTorque2 – is no exception. This latest product now features Bluetooth so data tightening data can be transferred from the tool to a computer, and tool settings transferred from a computer to the tool.…

Worlifts Ltd will be at Infrarail 2016, and we’d love to meet up! Worlifts have been a key player in the rail industry for years, and our dedicated Rail Division can supply both the expertise and products necessary to assist in the installation and maintenance of all types of catenary systems. In particular, and of interest…

Although many would argue that rail electrification is a good thing and in some cases, essential, it’s by no means guaranteed that all lines will be electrified. Barrow and Furness MP John Woodcock has urged the Furness community to make a “concerted case” for rail electrification line after a warning from the boss of Network Rail.…

The railway network in Britain is a cause of many arguments. There are those that would see nothing bad said against them, citing excellent journey times, incredibly scenery and the ability to travel vast distances quickly and efficiently. However, there are others who point out the almost prohibitive cost of travelling at peak times, empty…

Britain’s railway network has been growing exponentially for years now. With record numbers of travellers using it more and more each year, it’s not surprising that it’s begging to show the signs of strain. If you’ve ever used a busy commuter route in one of our bigger cities, you’ll know how difficult it is to…

Over the past couple of years, the rail industry has been in state of flux. Firstly there was the promise of billions of pounds of investment in the infrastructure, the electrification of railways and the new HS2 development. This promise then seemed to be in jeopardy as costs spiralled: In particular it points to “staggering…

The electrification of the rail network is a massive undertaking by the current government and it is a major part of infrastructure changes announced in the last parliament. With billions being invested in rail, it’s just one of upgrades that will see Britain’s rail network upgraded to meet the demands of a larger population and…

Many people are of the opinion that many regulations to do with their working environment don’t apply to them if they are self-employed or a contractor working independently of their hiring company. Likewise, many companies feel that the contractor carries the burden if they are using their own equipment on site. However, if you employ…

PUWER? What’s it all about? There are so many acronyms, abbreviations and initialisms in the health and safety world that it can be easy to switch off and lose the plot on exactly what we should be looking at or what rules we should be abiding by. The world of regulations is constantly changing, but…

Wherever you have hydraulic equipment, you have the need for regular and thorough maintenance. It’s essential that all hydraulic equipment is serviced and checked on a regular basis because of the potential dangers of failure. In many cases, hydraulic jacks and cylinders are put under an incredible amount of strain on a regular basis. They’re…

Enerpac has introduced the all new PTW-Series Pneumatic Torque Wrenches designed to make fastening a simple process in applications that required controlled bolting solutions.. The Pneumatic Torque Wrench tools are robust enough to withstand tough job site conditions, and are ideal for applications with a high volume of fastenings typically found in the mining, power…

Hydraulics can be dangerous; we know that it’s why a big proportion of our site is dedicated to health and safety matters. We value the safety of our clients and staff above all else. However, being safe and being paranoid about safety are very different things, and while it’s important to ensure your hydraulic equipment…

  Yes! Worlifts is there whenever you need us and we can get your hydraulic equipment up and running in no time, whether it’s in need of a service, or has broken down. All you have to do is give us a call and we can arrange for one of our fully equipped vans to…

“A Train operator was rapped by Government officials for turning off safety equipment on one of its steam trains near Doncaster, it has emerged. The Office of Rail and Road temporarily prohibited West Coast Railway Company Limited from operating steam trains on the mainline rail network last month because of the move, it has revealed”…

Whatever the reason, the breakdown of hydraulic equipment can cause major problems that will affect a company’s ability to operate efficiently. Even small problems can create hours of downtime and when you’re working on time-critical applications, this can mean huge knock-on effects to productivity and potentially missed customer deadlines. Certainly, an effective servicing and maintenance…

With over 100 exhibitors and over 1500 visitors, Liftex 2015 was the biggest exhibition for lifting professionals in the UK. This year it was double the size and held in the fantastic Liverpool Exhibition Centre, it brought together some of the best companies in the industry under one roof. Worlifts were there to meet and…

Hydraulic tools can be expensive to buy. We understand this, as we sell, maintain and repair them all day. We go to companies and service their hydraulic tools because it’s essential they’re kept safe, and this also costs money. If you need to use these tools all the time, buying them is probably the best…

Hydraulic Equipment has to put up with a lot. They’re often used to do the very heavy lifting in any engineering task, such as lifting trains on to tracks or splitting troublesome nuts. When used in such difficult, grimy and sometimes dangerous situations, it’s absolutely essential that the equipment is maintained to high standards. Even…

Here at Worlifts we’re committed to the health and safety cause. It’s an essential part of every organisation’s procedures to include advice and help for people operating machinery. Some safety precautions are obvious, such as helmets and safety harnesses, but there are many other areas that need to be considered. For example, Hand Arm Vibration…

Here, we view RIDDOR – the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations, 2013. These regulations apply in England, Wales and Scotland. Incidents that occur in Northern Ireland are instead to be reported to the HSE (N.I.). RIDDOR places responsibility on people in control of work places (known as the Responsible Person) to report…

For those in the construction or roofing trades who work at a substantial height, the threat of injury or death due to a fall is very real. Because of this, fall arrest systems were developed to stop at-risk workers in mid-fall, securing them before they hit the ground. A fall arrest system is generally made…

It may seem obvious, but in some industries and on some construction sites, you can be forgiven for thinking that health and safety is something that applies to other people. On the contrary, having an effective policy for working at height is essential in any organisation, and so is the equipment necessary to make sure…

It’s a question that’s asked by many people because, let’s face it, hydraulic equipment can be very expensive. But there are very good reasons why you shouldn’t buy cheap, and also why you should only buy from a reputable dealer. Regulations First of all, there is a lot of regulation around the operations and maintenance…

This is a brilliant set of slides which explains the dangers of working at height perfectly: 12 fundamental facts of Fall Protection and Height Safety By Capital Safety from Capital Safety

Singapore is a major commercial hub. It has seen huge growth in many markets, including the lucrative technical sector and this has led to a massive increase in commercial construction. It also does well in the world’s rankings for education, living standards, health-care and competitiveness. So it comes as a shock when a construction worker in…

We talk a lot on this blog about the need to ensure you have sufficient safety procedures in place to ensure that working at height is as risk-free as possible. When risks are there, and sometimes they’re unavoidable, there are ways you can mitigate those risks. For example, if you can’t have fall prevention in…

When out in the field and away from the workshop, having the right tools available is essential. You can’t simply pop back to the shop to get what you need, It’s important to have a selection of tools right where you need them. That’s why Enerpac have the “Power Box”, a powerful and yet portable…

When working at height, there is the inherent danger that someone could fall, and that the fall could cause an injury. It’s common sense that the higher you are, the more injury could be caused and so it’s essential all risks are mitigated. There are two ways of preventing such injuries and these are fall…

Pioneering Spirit, one of the world's largest ships, gets Enerpac Hyd

The health and safety of your employees is of paramount importance. Not only do you have a moral responsibility to ensure they work in an environment free of danger, you have a legal duty, too. All too often we hear of health and safety rulings where companies have suffered huge fines due to lapses. Even…

This is an interesting case from HSE and one we had not considered in the Worlifts offices before. The case (number 355) is based on someone carrying out sound insulation tests in houses on a construction site. He needed a 230v socket to plug in his equipment, however the construction company had a policy that…

Enerpac introduces the all new PTW-Series Pneumatic Torque Wrenches. These tough and reliable tools are designed to provide fast, safe, and simple fastening for applications that require controlled bolting solutions.

From 4th to 15th May this year, thousands of companies around the world are observing a “Stand Down” in an attempt to raise awareness and prevent falls in the construction industry. These are voluntary breaks by employers and they’re using this opportunity to remind workers about the dangers of working at height, demonstrating the correct…

From 12-14th May, 2015, the NEC in Birmingham will be host to the 12th international exhibition of railway equipment systems and services. Railtex is the place to see the latest technological innovations across all sectors of the rail industry and it’s the ideal opportunity for companies to show their capabilities. Worlifts is proud to be…

Health and Safety needs people in the media to show the positive aspects in order for others to pick it up. And then there are those that really take the biscuit! This is the shocking moment cyclists in the Paris-Roubaix race narrowly avoided a a high-speed train at a level crossing. A few among the…

The latest X-Edition tools incorporate all the simplicity, reliability and quality of the trusted S and W-Series tools, with some exciting new features designed to help increase operator safety, performance and ease of use. 1) Handle Mounts Handles mount on both sides and tops of the cassette to allow for extra maneuverability. 2) New Swivel…

The latest X-Edition tools incorporate all the simplicity, reliability and quality of the trusted S and W-Series tools, with some exciting new features designed to help increase operator safety, performance and ease of use. 1) Upgraded Handles Robust new handles provide safe and easy operation. 2) Swivel Manifold Design Extra durable new manifold with a…

Worlifts is always at the cutting edge when it comes to safety and performance and this is reflected in the company we keep. We’re a key distributer of Enerpac products and we’re proud to announce their new “X-Edition” range of tools that compliment our values perfectly.

As a provider of Health and Safety training and consultancy, it’s depressing to see so many people use the term as a way of simply being lazy. It’s rolled out as an excuse when really, people are just trying to avoid some work. Here are some great examples where the HSE have taken some HSE…

Your easy and long lasting solution to difficult access bolting applications  

Narrow access is a problem in many industries, when you’re tight on space you need a tool that can get into the gaps, but very often the tools that fit, just can’t perform. Enerpac have solved that problem with their new range of UltraSlim Hydraulic Torque Wrenches.

The Southern North Sea Conference 2015 will be the biggest exhibition ever delivered by the East of England Energy Group and Worlifts are proud to be taking part. Come and see us on stand B2 from Wednesday 4th March 2015 to Thursday 5th March 2015. Book now here : http://www.eeegr.com/events/sns2015-1287.html

Enerpac have recently released a new Industrial Tools catalogue, the E327e. Now available in 13 languages, the new-look E327e contains a range of new products as well as information about the Enerpac Academy and the Enerpac Maintenance Program. You can download the catalogue here: New Products A range of new products début in the catalogue,…

This video shows Enerpac products being used to push a new 44.5 foot bridge structure into position on PTFE sliding elements using a lateral slide method. Two RR-Series double acting hydraulic cylinders were used, each with their own ZU-Series hydraulic pump. The products used: RR-Series, Double-Acting Cylinders Enerpac double acting cylinders are rugged enough for…